Hydraulic Shear
This machine is mainly used for cutting baled plastics, natural rubber, synthetic rubber, and other plastic materials. It is especially suitable for installation beside an internal mixer for cutting small rubber blocks.
Plastic Extrusion Equipment
Plastic Recycling Equipment
Structure & Working Principle
The machine consists of a cutting blade, frame, hydraulic cylinder, base, auxiliary worktable, hydraulic system, and electrical system. A nylon pad is mounted on the base under the cutting blade to protect its edge.
During operation, the operator places the material under the cutting blade and presses the start button. The cutting blade is then driven downward by the piston rod along the guide rails on the frame, cutting through the material. The frame is equipped with upper and lower limit switches, which control the reversing valve to change the movement direction of the blade, while also protecting the cylinder end cover.
During operation, the operator places the material under the cutting blade and presses the start button. The cutting blade is then driven downward by the piston rod along the guide rails on the frame, cutting through the material. The frame is equipped with upper and lower limit switches, which control the reversing valve to change the movement direction of the blade, while also protecting the cylinder end cover.
Main Technical Parameters
| Model | XQL-80 | XQL-160 |
|---|---|---|
| Motor Power (kW) | 5.5 | 7.5 |
| Rated Cutting Force (kN) | 80 | 160 |
| Cutting Width (mm) | 690 | 790 |
| Cutting Stroke (mm) | 680 | 700 |
| Working Oil Pressure (MPa) | 8 | 5 |
| Overall Dimensions (L×W×H, mm) | 2000×1000×2500 | 2000×1000×2500 |
| Weight (kg) | 1000 | 1200 |